DIY Board and Batten Accent Wall: The Easy Method

Discover ways to set up a board and batten accent wall the straightforward approach! This step-by-step tutorial is straightforward, however will get you skilled outcomes that make a huge effect in any area!

Should you comply with me on Instagram, chances are high you will have been eagerly awaiting this board and batten accent wall tutorial! Accent wall therapies are such an efficient approach so as to add a ton of curiosity to any room or area. In our outdated lobby , we put in a fashionable DIY plank wall and it remodeled the lobby from boring to superior. And it’s possible you’ll do not forget that in our outdated kitchen , we upcycled an outdated fence right into a DIY herringbone accent wall (I nonetheless miss it). However imagine it or not, we have now by no means put in a board and batten accent wall till now!

We put in board and batten in our previously boring upstairs hallway and it TOTALLY remodeled the area! Better of all, the set up course of was truly far simpler than I anticipated. It helped that we didn’t take away our baseboards (I extremely advocate working together with your current baseboards–extra on that later)! And it was extremely reasonably priced and cost-effective. I’ve alllll the small print right here for you, so let’s dive in! You could find a supply listing for the hallway in our present house on the finish of this submit.

What’s board and batten?

First up, let’s be sure that we’re all on the identical web page after we use the phrase “board and batten.” Historically, board and batten is a siding and paneling type that locations slim strips of wooden over the joints of extensive boards, leading to a extremely fairly and basic wall remedy. “Battens” are vertical molding items put in on bigger “boards.” However as of late most individuals use their wall floor because the “board” portion and easily apply “batten” strips on high of their wall to create the look of board and batten with far much less work. That is what we did!

Notice: if in case you have wall texture/textured partitions, you could possibly set up skinny plywood behind your battens to get the normal look of board and batten (which is NOT textured).

An Vital Notice About Selecting Your Wooden

There are a zillion differing kinds and sizes of wooden you need to use to create a board and batten wall remedy. We selected 1/4″ plywood for a few crucial causes.

First, we wished to work with our current baseboards. The highest of our baseboards is only one/4 inch thick. If we used one thing like 1 x 4s to create our battens, they’d overhang the baseboards. Whilst you can reduce the underside of the battens at an angle to mitigate the overhang, I simply don’t love the best way that appears. And we actually did not need to take away our baseboards as a result of the millwork in our house is extremely nicely achieved and is high-quality.

Second, we had been in a position to full our total hallway utilizing simply 2 sheets of 1/4″ plywood, which made it very reasonably priced. We spent $43.98 per plywood sheet, so all of our wooden for this venture price solely $88!

Final however not least, I really like that because the board and batten is only one/4″ thick, we are able to nonetheless simply dangle issues on our partitions. It could be actuallydifficult to take action if we used thicker wooden as a result of it will make every little thing stick out actually far.

This submit comprises affiliate hyperlinks in your comfort. Click on right here for my full disclosure coverage .

Supplies Wanted for Board and Batten Accent Wall

Find out how to Set up a Board and Batten Accent Wall: A Full Tutorial

Step 1: Determine on the peak of your high board

There isn’t a magic components for this. I merely regarded on the wall and marked how excessive I wished the highest of our board and batten accent wall to be. I knew I wished it to be roughly 2/3 the peak of our doorways. For us, that magic quantity was 58″ from the ground. However the top you select is completely private desire.

I then used a degree to mark a line 57″ from the ground across the area so I might know the place to cease portray (extra on that subsequent).

Step 2: Determine on the dimensions of your horizontal items & batten items

Once more, loads of this comes down to private desire. However I might say that usually, I like to recommend making your high horizontal trim items narrower than your baseboards, however thicker than your battens. You possibly can see the measurements we selected under.

Step 3: Paint

I extremely advocateportray your partitions AND plywood forward of time. You possibly can completely wait to color every little thing till after it’s put in, however your paint job will not look almost as clear {and professional}, in my view.

I painted the partitions the place the battens would later be put in, as much as the road I discussed in step 1. I did not attempt to make the paint line neat and tidy since I knew it will be coated by the horizontal trim items.

I additionally painted the sheets of 1/4″ plywood with a paint curler earlier thanwe reduce them to dimension.

Step 4: Rip your plywood right down to dimension

Ripping refers to reducing the wooden alongside its grain for a lengthwise reduce. Such a reduce is simple to make, so do not be intimidated! All you want is a round noticed and rip-cut Round Noticed Information . It took us lower than 10 minutes to make all of our rip cuts. And I promise it is not scary, even if you’re a newbie! After we ripped all of our horizontal items, we reduce them to the proper lengths utilizing our miter noticed. Then we moved on to step 5.

IMPORTANT NOTE: To keep away from “tear out” and splintering out of your noticed, rip your wooden with the nice aspect dealing with DOWN. However trim it to size together with your miter noticed with the nice aspect dealing with up.

Step 5: Set up your horizontal items

Subsequent, you need to set your laser degree to mark the place you’ll be inserting the highest of your horizontal items. Use your pin nailer/brad nailer to safe them to the wall. This may cowl your messy paint line 🙂

Notice that we didn’t use Liquid Nails or any sort of development adhesive as a result of it is actually not vital for 1/4″ plywood (the person items aren’t very heavy) and if we ever need to take away the board and batten years from now, utilizing solely pin nails will decrease any harm to the drywall. Because the wooden items aren’t very heavy, you do not have to be overly involved about nailing right into a stud or studs. We used a criss-cross nailing sample for added energy.

Step 6: Determine on the format in your vertical items/battens

That is BY FAR probably the most troublesome a part of this venture. And we approached it a bit in a different way than most individuals as a result of we had been putting in our board and batten in a hallway.

Widespread spacing between battens is wherever between 12″ – 20″. That you must know roughly how far aside you want your battens to be. I used to be aiming for round 18 inches between battens.

In case you are working in a room with lengthy partitions that are not interrupted by a lot of doorways, you can probably use the identical components in your total wall/room.

This is the issue with utilizing a single “components” in a hallway….As a result of you’ll have so many doorways interrupting your wall area, should you attempt to use the very same batten spacing between your doorways, you’ll wind up with battens in bizarre locations.

We averted that drawback by treating every part of wall between doorways as unbiased when doing the maths. I extremely advocate doing this if you’re putting in board and batten in a hallway as nicely.

The Spacing Components

So meaning we did not find yourself with 18-inch spacing on this wall, however that’s OKAY!!!!! I simply did not desire a span bigger than 20 inches.

We repeated this components for every part of wall. We acquired as shut as we may to 18-inch spacing between battens in every part of wall.

As a result of we handled every wall independently, the spacing between battens is barely totally different from wall to wall. But it surely’s NOTHING the bare eye will ever discover!

That is far preferable to following an actual components and winding up with a batten proper subsequent to a door body. Or a batten 6 inches earlier than a wall ends. We wished every board and batten part to look good and symmetrical and this was one of the simplest ways to do it!

Step 7: Set up your vertical items/battens

Measure the size of every vertical batten separately. Except your own home is MAGIC, your flooring/baseboard will not be completely degree. As a result of your high horizontal board WAS put in completely degree, the size of your battens might range barely.

We discovered it useful to tape our battens into place and double-check our measurements BEFORE nailing them into place.

Use your pin nailer to connect your vertical boards/battens to the wall. Remember to examine for degree as you nail them into place! In case you are doing this by your self, put one nail within the center, be sure that it’s degree, after which nail up and down the board.

Step 8: Fill nail holes, caulk and touch-up paint

The onerous half is over! All you’ll want to do now’s fill all your nail holes with DAP Plastic Wooden-X . Then let it dry and sand it clean.

You additionally need to caulk all your edges and seams with DAP Alex Plus Caulk . To caulk, run a small bead of caulk the place the trim items meet your wall and clean the bead of caulk down together with your finger. Preserve a really moist rag with you so you possibly can clear your finger between swipes.

As soon as you have crammed all of your nail holes and caulked, paint over your wooden filler and caulk traces. And do every other paint contact up that could be wanted. These are the ending particulars that can make ALL THE DIFFERENCE on the planet! Do not imagine me? Take a look at the earlier than and after under. In order for you your board and batten to look skilled, don’t skip this step.

Pictures of The Completed Undertaking

This is the way it all turned out! We’re so, so proud of it!

I am THRILLED we determined to make use of 1/4″ plywood as a result of it sits completely flush with our current baseboards.

It additionally permits us to simply dangle stuff on our partitions with out it protruding in a bizarre approach!

Often Requested Questions

How a lot does board and batten accent wall price?

This relies so much on the width of your partitions, the overall dimension of your area and the fabric you select. However our hallway is fairly giant. We had been in a position to do it for under $88 in plywood. If I add in the price of the paint, caulk and nail filler, this venture price us about $150 whole.

What colour paint did you utilize?

We selected Refuge by Sherwin-Williams and find it irresistible. Remember to comply with my suggestions for selecting paint colours in your house , as a result of paint colours look drastically totally different relying on the lighting in a specific room/area! I additionally advocate my favourite methodology for testing paint colours !

What paint sheen did you utilize in your board and batten?

I sometimes choose an eggshell end on partitions, however as a result of we additionally painted our baseboard, door trim and doorways the identical colour and the board and batten wall remedy, I used a satin paint end for every little thing. You could find suggestions for selecting a paint sheen right here .

Hallway Supply Record

I’ve linked what I can under. The mirror was a DIY venture. You could find the tutorial for it right here—> DIY Mod Podge Mirror With Napkins.

When you have every other questions, one of the simplest ways to achieve me is to ship me a DM through Instagram:) And should you use this tutorial, I might like to see the way it seems! Simply share on Instagramand tag me @tasha.kaleidoscope!

Different posts it’s possible you’ll take pleasure in:

Questioning how I method remodeling rooms and areas in our house? Take a look at Designer in a Binder® .

And in order for you unique content material and behind-the-scenes sneak peeks, make sure to subscribe earlier than you head out!