[ad_1]
I lastly determined what I needed to do to the partitions within the water closet (bathroom room) of our grasp rest room! I simply couldn’t have plain white partitions in there, and tile was out of the query, so I needed to give you one other thought.
A couple of days in the past, I discussed the potential of doing a wooden slat wall (so long as we don’t name it “shiplap” 😀 ), however most of you didn’t like that concept. However a number of of you had different concepts, and as I used to be pondering these concepts, it led me to my last resolution.
So let me again up a bit and clarify that the partitions in the primary a part of the lavatory would be the Fashionable Masters Venetian Plaster end on high (which is already finished), after which the decrease a part of the partitions can be white wainscoting similar to I’ve within the hallway rest room…
I contemplated utilizing easy image body molding on the wainscoting, like I’ve within the music room, however I lastly determined that this type of wainscoting (which I imagine known as decide’s paneling) is my favourite. So naturally, it ought to go in our grasp rest room.
Anyway, a number of of you advised that I simply carry the partitions of the primary rest room space in to this water closet, however that’s out of the query. There’s simply no method I can have an all white bathe to the left of the mural wall, after which an space with teal higher partitions and white decrease partitions to the appropriate of the mural wall. That sort of asymmetry would ship me over the sting. At a naked minimal, I want symmetry of shade, that means that the bathe and the water closet, on the very least, have to be the identical shade. So which means the water closet must be white.
However the thought of simply having plain white partitions didn’t sit nicely with me. I’d be tempted to hold art work on a plain white wall, after which there goes my symmetry of shade, and it will draw the eye away from the mural. However I LOVED the concept of carrying the wainscoting into the water closet.
I believed by means of some completely different choices, and I beloved the concept of doing the decrease partitions the very same method as the primary a part of the room (similar to within the hallway rest room), after which including the identical wall therapy above the chair rail as nicely, and portray all of it white.
The issue with that concept is that I’m nonetheless planning on incorporating the glass penny tile into the wainscoting in the primary a part of the room, and I did NOT wish to add tile to the water closet. I couldn’t give you a method to have the identical decrease wall design in each areas, however have the primary space with the glass tile, and the water closet with out the glass tile, and make that look intentional and deliberate. I believe it will simply appear like I ran out of tile and needed to make do.
So in the long run, I made a decision to do the decide’s paneling within the water closet, however take it the complete top of the wall. After which the entire thing can be painted white. Clearly, this addition gained’t be completely symmetrical with the bathe, however actually, there’s no method to obtain excellent symmetry with the bathe until I’m prepared to tile the partitions within the water closet. And I’m not. However so long as each areas are white, I’m okay with that.
I acquired fairly a bit finished on this little space yesterday. I began by including baseboards alongside the ground (utilizing 1″ x 5″ pre-primed lumber), after which added some horizontal items across the high of the partitions on the ceiling. For these, I used 1″ x 6″ items. After which I added the vertical items, that are 1″ x 4″ lumber.
At this level, it appears fairly plain, and sort of has a farmhouse board and batten look to it. And in order for you that full top farmhouse board and batten look, that is the place you’d cease. You’d simply fill the nail holes with wooden filler, caulk the areas the place the boards meet the wall and ceiling, and paint.
However after all, the farmhouse board and batten look isn’t fairly what I’m going for in right here, so I nonetheless have fairly a little bit of trim so as to add to take this from farmhouse to conventional, which is rather more my type.
However hopefully you may sort of envision how the 2 will coordinate with one another. If you happen to can, attempt to envision the hallway rest room type of wainscoting under the higher blue partitions, with the glass penny tile integrated into the wainscoting, after which the identical type of paneling put in full top within the water closet.
It is a a lot smaller space than the bathe, so it was troublesome to get image of the wall that’s truly hidden behind the mural wall (perpendicular to the mural wall). That is the wall the place the bathroom will truly go, and this wall is not going to be divided into three sections like the opposite two partitions.
I purchased an area saving, wall-hugging bathroom to go in right here in order that the bathroom gained’t stick out previous the quick wall (the mural wall), and if I divide that wall into three equal sections, that places one of many vertical items behind the bathroom. And I don’t have 3/4-inch to spare behind the bathroom. Plus, I’ve a plan for this wall because it’s tucked away, and no matter I do there gained’t detract from the mural. So on that wall, I’m trimming it out as one large rectangle fairly than three.
Anyway, I acquired all the principal boards put in, did a bit of caulking across the ceiling, after which stuffed all the nail holes and joints with wooden filler.
I love to do the wooden filling and sanding at this stage, fairly than ready till after the remainder of the trim is put in, in order that it may be sanded with a rotary sander. If I set up the remainder of the trim first, after which do the sanding, all of it must be finished by hand as a result of the remainder of the trim stands out only a tiny bit previous these boards, and it’s unimaginable to make use of a rotary sander after that trim is put in and never mess it up with the sander. I do know that from expertise. 🙂
So it’s nothing fairly to take a look at simply but. I left it at this ugly stage, which I at all times name the “rooster pox stage” in my thoughts. It at all times jogs my memory of an individual with rooster pox with calamine lotion on every little itchy bump. 😀
I’m simply comfortable to have lastly decided that I’m proud of — a choice that permits me to maintain the room white whereas including some curiosity to the partitions in a method that may preserve me from needing to hold art work on the wall that may present from the primary a part of the room. And in the event you can’t envision it simply but, I ought to have rather more progress to share with you on Friday.
Addicted 2 Adorning is the place I share my DIY and adorning journey as I rework and beautify the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do nearly all of the work on the home on my own. You may be taught extra about me right here.
I hope you’ll be part of me on my DIY and adorning journey! If you wish to comply with my initiatives and progress, you may subscribe under and have every new publish delivered to your electronic mail inbox. That method you’ll by no means miss a factor!
[ad_2]
Source link