[ad_1]
I do know that is beginning to really feel just like the by no means ending mission. Imagine me, I’m getting bored with engaged on it. However I’m at that stage within the mission the place the entire ending particulars take so lengthy. The constructing is all the time the quick half, however the ending all the time appears to take manner longer than I believe it ought to.
The excellent news is that the entire cupboard unit within the workplace space of the studio has now been wooden crammed, sanded, primed, and sanded once more. So after just a little little bit of caulking, it will likely be prepared for paint! The ultimate colour will probably be pink, however I do love that I can lastly see all of it one colour now. The final time I confirmed you the progress, it regarded like this…
And now that the entire thing is primed and sanded, it seems to be like this…
To prime the cupboards, I used Zinsser B-I-N Shellac-Primarily based Primer. It’s a brand new favourite product for me. I used it for the primary time on the ceiling of the entrance porch once I repainted it again in April of 2023. The primary time I painted the ceiling, I didn’t prime the wooden in any respect, so all of those knots had seeped via the paint.
And at present, nearly a 12 months later, there’s not a single knot exhibiting via the brand new paint. It nonetheless seems to be prefer it did the day I took this image after repainting the ceiling.
So I extremely suggest it when portray wooden that has by no means been primed and painted earlier than, or when attempting to cowl knots, stains, and many others. I additionally used it on the studio flooring earlier than I painted it, and the ground, though it’s very soiled and dusty and in determined want of a superb scrubbing, is holding up amazingly effectively.
Anyway, I did issues in a unique order this time than I normally do. My typical order is to wooden fill, sand the wooden filler, after which caulk. As soon as the caulk is dry, then I prime, sand, and paint. However this time, I made a decision to wooden fill, sand, after which prime earlier than caulking.
This order truly helps to focus on these areas that want caulk. Once I caulk earlier than priming, I typically see areas that I missed as a result of they had been tougher to see. However once I prime earlier than caulking, it’s onerous to overlook these areas that want caulk. They stick out like a sore thumb.
When the primer is a brilliant, clear white, these cracks that want caulk are onerous to overlook.
However the primary purpose that I did it on this order this time is as a result of the plywood I purchased was very tough. Have any of you seen a really noticeable lower within the high quality of plywood from Residence Depot and Lowe’s recently? I positive have. I purchased the identical sanded plywood that I all the time purchase for constructing cupboards and furnishings, and but, this wasn’t sanded as easily as what I’m used to.
So I used to be involved that if I put caulk over that naked, tough wooden, the moist caulk would seize onto that tough wooden, and I might have an actual problem getting a clean caulk end. And primed wooden is a lot simpler to sand clean than unfinished wooden. So I made a decision to prime first, sand the primer clean (by hand utilizing 220-grit sandpaper), after which caulk. I believe I’ll find yourself with a a lot better end this fashion.
Whereas I’ve gone over this data earlier than, I do wish to make clear once I use wooden filler, and once I use caulk. It’s quite simple. If I’m eager to create a seamless, very clean floor, I exploit wooden filler. For instance, this space the place the entrance trim piece attaches to the aspect plywood piece had a small crack between the 2 items. I crammed it with wooden filler, after which used my electrical sander with 120-grit sanding discs to sand it completely clean. Now that it’s primed, it seems to be clean and seamless.
Right here you possibly can see the identical factor on the surface panel. The place that entrance trim meets the aspect plywood, it seems to be seamless. That’s from utilizing wooden filler, after which sanding it completely clean earlier than priming, as a result of it definitely wasn’t seamless earlier than the wooden filler and sanding.
I additionally fill nail holes with wooden filler in order that they are often sanded completely clean as effectively.
Caulk, however, is used to fill areas that don’t have to be a clean, flat floor. Anyplace the place there’s a change in aircraft, like the place the trim meets the cupboard field, or one trim meets one other trim, these areas are crammed with caulk.
I do have an exception to that rule on this cupboard. This space the place the tall aspect cupboards meet the quick center cupboards, there are two items of trim that meet on the identical aircraft.
Nevertheless, I’m going to make use of caulk right here as a result of I don’t essentially need or want these to end up trying completely clean and seamless. I’m okay with them trying like two separate items, however I simply don’t need that deep crack there.
In order that’s my common rule for deciding the place to make use of wooden filler and when to make use of caulk. If I wish to find yourself with a superbly clean floor, I exploit wooden filler as a result of it may be sanded to a clean, flawless end. If I’m simply filling cracks between two items (and 99.89% of the time, these two items will meet at totally different planes), I exploit caulk.
That’s the progress, and I’m actually hoping that this may lastly be the day I can truly get some colour on these cupboards. I’m so anxious to see pink cupboards on this nook of the room!!
Addicted 2 Adorning is the place I share my DIY and adorning journey as I transform and beautify the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do the vast majority of the work on the home on my own. You possibly can study extra about me right here.
[ad_2]
Source link
