[ad_1]
Yesterday, I shared my resolution on what I plan to do with the doorways within the again entry of the studio. When you missed that, you may learn out it right here. Since my thought is a bit more difficult than simply buying a quart of paint and portray a couple of doorways, I’m giving myself time to determine precisely learn how to go about getting the look I would like. So within the meantime, I made a decision to perform a little demolition on the studio half lavatory to get it prepared for its new wallpaper.
However now I’m within the course of of constructing some modifications in order that the lavatory will movement higher with my new imaginative and prescient for my studio. I’ve already repainted the vainness, painted the ground, and designed a brand new wallpaper that may go on the partitions. That wallpaper appears to be like like this…
So when that is completed, the lavatory will find yourself being each bit as colourful as it’s now, however I believe it’s going to coordinate a lot better with what’s occurring in the primary a part of the studio.
Just a few weeks in the past, I made a decision to interchange the yellow accent tile with a reed-type design utilizing dowel rods. I spent quite a lot of time eradicating the yellow tiles in half of the lavatory, after which chopping and sanding items of dowel rods and gluing them to the wall.
That was a enjoyable mission, and I might like to see it accomplished, however I made a decision that it simply wasn’t proper for this lavatory. So final night time, I spend a while popping these off of the wall with a bit of 5-inch prybar.
I began out utilizing my warmth gun to melt the glue earlier than prying them off, however that turned out to be actually messy and sticky. I discovered that there was truly no have to warmth the glue earlier than eradicating the dowels. They popped off the wall fairly simply and cleanly with out using the warmth gun.
The identical can’t be stated for the yellow tiles, although. The half of the room through which I had already taken the yellow tiles off of the partitions had three massive gouges within the drywall from me prying these tiles off of the wall. I didn’t hassle patching them earlier than gluing on the dowels, however now that my plans have modified, and so they’ll be lined by nothing however wallpaper or paint, I’ll must restore them.
So after I began eradicating the tiles from the opposite half of the room. I used the warmth gun. The tiles had been utilized to the wall utilizing Easy Mat adhesive sheets from Dwelling Depot. And let me inform ya, these issues are sticky! On the primary half of the room, I used to be utilizing an enormous prybar and a hammer to get the tiles off of the wall, and people issues didn’t need to come off. That’s why I left three massive gouges within the drywall.
However utilizing the warmth gun to take away them made issues a lot simpler. I used to be in a position to get the second half of the tiles (and the sticky sheets) off of the partitions with no injury to the drywall.
It did peel off quite a lot of primer and paint from the drywall, which has left quite a lot of very uneven areas that may have to be mudded over and sanded easy earlier than I can transfer on with paint and wallpaper, however that’s fairly easy.
Now that I’ve determined to take away the accent and chair rail, I’ll be capable of have a full apron on the window trim. As a result of the chair rail got here up so excessive, I’ve had this tiny little 1-inch apron sandwiched between the window sill and the chair rail all these years. That’s a kind of issues that basically irritated me, however I didn’t actually have another alternative if I needed a chair rail.
However now that the chair rail is gone, there might be loads of room for a full apron. It’ll look so a lot better!
The trim across the mirror, which was accomplished precisely just like the window and door trim, was additionally lacking an apron.
Regardless that there might be loads of room for an apron now, I’ve determined to take away it utterly and discover a good framed mirror to make use of on this room as a substitute.
After I did this lavatory (and the hallway lavatory) years in the past, I liked the concept of framing out the mirrors to match the home windows and doorways. However I’m prepared to maneuver previous that look now. I need to hold the window and door trim on the home windows and doorways, after which take the chance to usher in a bit of additional one thing with the mirrors.
Sadly, I glued this mirror on to the wall, so I’m positive getting it off will trigger some injury that may want restore.
So issues on this lavatory appear to be a whole mess proper now, but it surely has to worsen earlier than it will get higher. I’m very glad it’s a tiny lavatory, so though the partitions will want some restore earlier than I can wallpaper, at the very least I don’t have quite a lot of space to cowl. I’m simply actually excited to lastly get the wallpaper on the partitions! I’ve had the wallpaper for weeks, and I’m able to see some progress on it.
Addicted 2 Adorning is the place I share my DIY and adorning journey as I transform and embellish the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do the vast majority of the work on the home on my own. You’ll be able to be taught extra about me right here.
[ad_2]
Source link
