[ad_1]
I didn’t get a lot achieved on the studio yesterday as a result of, if I’m actually sincere, I’m so bored with this summer season. Yesterday, after Matt and I had completed lunch and I used to be on the brink of head into the studio to work, Matt checked the climate. It was 106 levels with a “looks like” temperature of 112. I assumed I may push by means of, however a variety of what I wanted to do was exterior work. And after I opened the again door and felt that wall of warmth hit me within the face, I misplaced all motivation.
I managed to get my miter noticed arrange, and minimize three items of lumber, and I used to be achieved. I simply couldn’t push myself to do extra. I’m so over this summer season and this climate, and I’m prepared for some cooler fall temperatures to get right here. Thus far this month, we’ve had solely at some point under 100 levels. That day, we had a cool 97-degree day.
Anyway, most days I can push by means of. Yesterday, I simply couldn’t make myself do it.
However I did handle to do one factor that I needed to get achieved, and that was to repair the toekick on the mural wall of cupboards within the studio. If you happen to’ll keep in mind, I had initially not deliberate to do a toekick on these cupboards. I had deliberate to trim out the underside like I’d a bookcase, sans toekick, as a result of I didn’t suppose I’d really be utilizing that countertop a lot.
Because the IKEA legs for the Sektion cupboards didn’t match my want (I wanted mine to be shorter than their legs), I ended up making these utilitarian ft…
After which I hooked up them utilizing my scorching glue gun.
As a result of I wasn’t planning a toekick, I hooked up these entrance ft on the very entrance of the cupboards in order that the trim items might be nailed on to these ft and the entrance of the trim can be flush with the entrance of the doorways and drawer fronts.
So after I acquired thus far, and realized that I’m really going to be utilizing this countertop fairly a bit, and I wanted a toekick in spite of everything, I needed to discover a solution to make that occur.
In all of my years of DIYing, I’ve realized that there’s at all times an answer to issues. I’m usually fairly good at fixing these issues, and I’m the kind of one who received’t relaxation till I discover a resolution in order that I can have issues precisely like I would like them.
Fortuitously, this didn’t require an entire lot of thought. Since I solely hooked up them with scorching glue, and didn’t use any nails or screws to safe them, this was really fairly simple.
I merely took my hammer, gave every foot a few good, robust whacks on the ends (not within the center the place such power may have damaged the entrance piece of wooden), and knocked every foot free from the cupboard.
I do know that can carry up the query, “Does that imply that scorching glue doesn’t maintain properly?” Sizzling glue holds simply fantastic, however in fact, it’s not acceptable for each single venture the place it’s good to connect one floor to a different. It’s fantastic for some tasks, however not acceptable for others.
On this explicit case, it was fantastic, and would have held up completely had I not whacked them with a hammer. 😀 In spite of everything, these cupboards are all screwed to one another very securely, after which the entire row of cupboards is screwed to a horizontal board which is screwed into studs. Your complete row of cupboards may be very safe, and these ft have been simply including help on the entrance. So there was no want in going overboard with securing the ft. It’s not like they’re going to in some way “stroll” their manner out from below the cupboards. Sizzling glue would have saved them in place for so long as the cupboards have been there…once more, had I not whacked them with a hammer.
They did require a few actually arduous hits with the hammer to get them unfastened, however one cause they got here unfastened comparatively simply is as a result of they have been glued to plastic laminate, which is what IKEA Sektion cupboard containers are manufactured from. They use plastic laminate for a cause — it’s a really sturdy, non-porous floor that’s simple to maintain clear. Because it’s a non-porous floor, which means the new glue received’t stick almost as tightly on it as it could have had I glued these ft to unfinished plywood or MDF. So I felt assured that I may get them unfastened with a few arduous whacks with a hammer.
As soon as every one was unfastened, I moved it again 3.5 inches, and re-glued it into place. To try this, I really simply put the brand new scorching glue on the angle the place the ft met the ground. In different phrases, slightly than gluing the ft to the cupboard containers once more, I actually glued them to the ground this time. 😀 Hey, if it really works, I’ll attempt it! And this labored simply fantastic.
As soon as I had all of them set again 3.5 inches and glued into place, I minimize the items to cowl these ft to create the toekick.
As soon as I had all of them minimize to size, I eliminated them, painted them, after which nailed them into place utilizing 1.5-inch 16-gauge nails.
And listed here are the cupboards with the brand new, completed toekick…
The place there’s a will, there’s a manner, my buddies! That’s not just a few foolish little saying. It’s the reality. Generally downside fixing can take just a few days for me to provide you with an answer. Different instances, the answer is apparent. And typically, issues could require just a few good whacks with a hammer, and downside solved! 😀
I nonetheless need to fill within the gaps on the ends between the cupboards and the aspect partitions. There shall be no aid within the climate this weekend, so I hope I can strengthen my resolve to get this achieved. This wall is so near being completed!
Addicted 2 Adorning is the place I share my DIY and adorning journey as I rework and adorn the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do nearly all of the work on the home on my own. You’ll be able to study extra about me right here.
[ad_2]
Source link
