[ad_1]
After having a little bit of a setback with the painted studio ground, I’m again on monitor and nearly completed with the ground. I’m not fairly positive which venture I’ll tackle subsequent within the room, however I can inform you which venture has been consuming my thoughts during the last couple of days — including trim and paint to my IKEA Veddinge cupboard doorways and drawer fronts. I’m so anxious to get to that venture!!
I purchased the Veddinge cupboard doorways and drawer fronts particularly as a result of I used to be planning on portray them a customized shade, and I wished the liberty so as to add trim in any configuration that I wished. And if I keep in mind accurately, the Veddinge was the most cost effective choice, which made it the right choice for a DIYer like me so as to add customized touches.
I really like the straightforward trim on the cupboard doorways, and the way it’s echoed within the body across the higher open cabinets. And people gold accents are good! I do love gold with cool colours, like that blue built-in, or my authentic inexperienced cupboards on this home.
Gold simply appears to work completely with cool colours. I’m undecided how I really feel with gold accents on heat colours, just like the pink that I plan to make use of on my studio cupboards. Proper now, I’m nearly 100% positive that I’ll be utilizing the darker pink beneath, which is known as Tuberose by HGTV Residence Sherwin Williams from Lowe’s.
Heat colours appear to work higher with silver accents in my thoughts, however I don’t do silver accents. (I had sufficient of these within the 80’s, 90’s, and early 00’s.) So I do plan to deliver again the gold leaf (that may take me again to the times of the unique kitchen rework) and provides it a strive on the Tuberose cupboards. It might or might not work. We’ll see.
However so far as including trim, I had deliberate on simply shopping for small wooden trim from Residence Depot, gluing/nailing it onto the cupboard doorways and drawer fronts, then doing my typical wooden filling, sanding, and caulking earlier than portray all the things. And I nonetheless would possibly try this. It will undoubtedly be the most cost effective solution to obtain the look I would like, and I’ve had loads of expertise with it. In spite of everything, I made slab doorways for the cupboard within the hallway, after which added trim to the entrance within the actual method I’m describing.
And I additionally did that in my mother’s kitchen when she and I labored collectively to makeover her kitchen. I made new slab doorways and drawer fronts to interchange the originals, and added trim to the entrance.
In order that’s what I’ve been planning on doing with the IKEA cupboard as properly, and I very properly should try this. Like I stated, it might be probably the most economical choices.
I’ll admit that after I opened up the bins of the IKEA doorways and drawer fronts, I instantly bought a little bit nervous about nailing trim to the fronts. The end on these is so good and easy! I don’t know for those who can inform from an image, however there’s not a flaw to be seen within the paint end on these.
That end is so good that I began to surprise if it was truly a plastic laminate, and placing nails (even tiny end nails) into plastic laminate will be difficult enterprise. It might crumble the laminate, particularly if it’s low-cost plastic laminate. However I double checked, and within the “supplies” part of the product description on the IKEA web site, it doesn’t point out something about plastic laminate. It says they’re made out of fiberboard, polyurethane paint, and acrylic paint. So I must be wonderful placing tiny end nails into it.
However there’s another choice that I’ve been contemplating, and that’s Overlays. I keep in mind seeing these for the primary time a number of years in the past, after which I fully forgot about them till they randomly appeared in my Instagram feed only in the near past. They’re principally laser-cut PVC designs which might be reduce to the precise dimension you want, and that adhere proper to the door and drawer fronts. Right here’s an instance from their web site:
I don’t need something that intricate. I nonetheless desire a easy body design. But when I purchased these, it might enable me to keep away from having to place any end nails into the doorways and drawer fronts. And it positive could be rather a lot sooner! AND they might be good. Lasers can reduce issues with absolute accuracy that my DIY makes an attempt can’t compete with.
Plus, I really like attempting new issues, and it is a product that I’ve wished to strive for a few years, however have by no means had (or made) the chance. So this is perhaps a enjoyable change of tempo. I haven’t priced it but. I’ll be curious to see how the worth compares to buying unfinished trim and doing it myself. I’m positive Overlays would price many occasions greater than shopping for unfinished trim, but it surely is perhaps price it if I can save a ton of time! We’ll see, but it surely’s a enjoyable concept to think about.
Addicted 2 Adorning is the place I share my DIY and adorning journey as I rework and adorn the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do the vast majority of the work on the home on my own. You may study extra about me right here.
[ad_2]
Source link
