[ad_1]
I’ve already shared about how I carpeted the principle flooring of the house fitness center utilizing FLOR carpet tiles (you’ll be able to see that right here), so I hadn’t truly deliberate on sharing the method of ending the ground within the closet space of this room. However as soon as I obtained began on the precise venture yesterday, I made a decision that I wanted to share it.
I needed to share this course of for one motive — to indicate that even perfectionists like myself typically must undertake a “simply get it executed” perspective.
Right here’s what the closet space seemed like earlier than I completed it yesterday (besides that the principle a part of the room had the brand new carpet squares, not the previous foam tiles)…
So I needed to transfer all the things out earlier than I may even get began. And as soon as all the things was out, right here’s what the precise flooring in there seemed like…
That’s subfloor. This home is over 70 years previous, and the unique subfloor is 1″ x 8″ and 1″ x 10″ boards, and as you’ll be able to see it had some points.
The entire flooring on this total room has points, and that’s why I didn’t decide to sand and refinish the hardwood flooring. Sooner or later within the very distant future, I’d prefer to have the entire flooring and subfloor on this room eliminated and changed. However for now, I simply wanted a stable base on which to place the carpet squares.
So after working all afternoon and night, that is what the ground within the closet seemed like after I was completed…
It nonetheless wants baseboards and quarter spherical, however doesn’t that look so good!! I used to be so excited to lastly have this executed. I’ve been taking a look at that subfloor since 2019, so I’m thrilled to lastly have this completed.
However once more, the purpose of this publish is to indicate you that typically, even I, a perfectionist, must undertake a “simply get the factor executed” perspective, and regardless that the method could look horrible, I arrive at an finish end result that I can reside with.
My important aim was to get this executed with out spending any extra money. That meant that I wanted to make use of solely what I had available. First, I wanted some type of vapor barrier, so I had some Tyvek home wrap available. I stapled that into place immediately onto the subfloor.
I needed to lower a gap for the scuttle gap entry into the crawl area on the left facet of the closet.
After which I used what I had available to construct that flooring up 3/4 inch in order that it was degree with the hardwood flooring in the remainder of the room. I began with the few leftover items of hardwood flooring, and put in these till they had been even with the closet facet of the jambs on the cased opening.
After which I used items of three/4-inch MDF that I had available. Yep…MDF. 🙂 Once more, it’s what I had available, and I didn’t need to spend any cash on “flooring” that was simply going to be lined up.
It required lots of reducing, and piecing collectively, and filling in edge gaps, however I lastly obtained the entire thing lined. I didn’t really feel the necessity to lower a brand new scuttle gap cowl, so I saved the unique one with the unique flooring boards connected to it, and simply crammed within the areas round it.
And sure, I used my jigsaw proper there within the room, proper on my new carpet. 🙂 After residing with these FLOR tiles for just a few days, and seeing how sturdy they’re, and the way straightforward they’re to hoover, I felt fairly assured that they’d be simply nice.
Right here’s a better have a look at the scuttle gap cowl with the unique flooring boards, and the MDF round it. The entire leftover flooring boards and the MDF are nailed all the way down to the subfloor, so there’s no means they’ll shift round.
And simply to place your thoughts comfy, right here’s what all the things seemed like after I vacuumed up the mud, and simply earlier than I began placing the carpet tiles down.
The toughest a part of placing the carpet tiles within the closet was reducing the piece out for the scuttle gap. By this time, I had had loads of expertise reducing the carpet tiles to go across the perimeter of the partitions, however this piece wanted to be lower completely as a result of it was going for use. I couldn’t have any snags on the perimeters, or jagged cuts.
I did handle to get it lower out with pretty clear edges, and naturally, the half that lined the scuttle gap was six separate items. So I used duct tape to tape these collectively securely on the again.
I’ll finally glue this carpet piece onto the wooden, however that can truly require a purchase order of contact cement or one thing comparable, in order that didn’t get executed yesterday.
However for now, the carpet piece lies virtually completely in place. Initially, I may see the lower fringe of the carpet sticking up simply barely. That’s the form of factor that this perfectionist finds unacceptable.
And in individual, its apparent that it wasn’t only a stripe within the carpet as a result of the stripes go all the way in which throughout. The white of the lower edge had begins and stops throughout the sting of the tile.
So I solved that drawback with a black Sharpie marker. I used it to make the lower fringe of the carpet piece black in order that it could mix in with the carpet a lot better.
And that labored completely! I truthfully don’t assume that anybody would have the ability to inform that there’s a scuttle gap to the crawl area proper there.
In order that daunting venture — one I’ve been dreading for much too lengthy now — is lastly completed. And regardless that it doesn’t look fairly in any respect beneath (it actually is a Frankenstein’s monster of a flooring below there), the tip end result appears to be like fairly darn good, if I do say so myself. 😀
Subsequent up, I want to put in the remainder of the trim (baseboards within the closet space, and quarter spherical in the entire room), after which do some paint touchups on the closet partitions, after which I can begin including the dresser, TV, cabinets, mirrors, and no matter else I determine to place into this closet.
Addicted 2 Adorning is the place I share my DIY and adorning journey as I transform and embellish the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do the vast majority of the work on the home on my own. You’ll be able to study extra about me right here.
I hope you’ll be part of me on my DIY and adorning journey! If you wish to comply with my tasks and progress, you’ll be able to subscribe under and have every new publish delivered to your electronic mail inbox. That means you’ll by no means miss a factor!
[ad_2]
Source link
