[ad_1]
I’m nonetheless plugging away on the grasp lavatory, and the wainscoting on the house gymnasium facet of the room is sort of completed! I lastly began the ultimate step yesterday — including the glass penny tile accent strip into the highest of the wainscoting.
If you happen to missed the earlier two posts on this choose’s paneling wainscoting undertaking, you could find them right here:
Right here’s how the wainscoting seemed earlier than including the glass penny tile. I wooden stuffed, sanded, caulked, primed, and painted all the wooden components…
After which I added Musselbound tile adhesive backing to the realm the place the tile was going to be put in…
Once I had all of that space lined with the Musselbound adhesive backing, I peeled off the protecting paper from the entrance, after which pressed the tile onto the backing. These items is VERY sticky, and it’s not straightforward to regulate the tiles as soon as they’re caught on. I wouldn’t say it’s an “just one probability” type of factor, as a result of you may get the tiles off if it’s worthwhile to readjust (a minimum of you may with these tiny tiles), however it’s not straightforward.
I began within the nook in order that I wouldn’t have to make any cuts on this nook. As a result of penny tiles are staggered, they match collectively in a nook flawlessly and seamlessly with out having to make cuts.
After which I labored out from the nook in direction of the ends…
The ends weren’t really easy as a result of these tiles did require cuts. I needed to buy this glass tile nipper to trim these tiles. It is a completely different type of nipper than the one you’d use for ceramic or porcelain tile.
I managed to get the tiles for this finish lower, however they’re removed from good. Let’s simply say that cup chopping shouldn’t be one thing I’ve ever been good at, and I’m particularly not good at it when coping with tiny items of glass. However I a minimum of acquired the 4 lower for this finish. Simply don’t look too intently. 😀 I believe as soon as it’s grouted, my glass chopping flaws will likely be hidden a bit of higher.
Sadly, I attempted over and time and again to chop those for the opposite areas, however I haven’t had any success but. So the realm the place the tile lifeless ends into the door casing nonetheless appears like this…
Right here’s a more in-depth view in an effort to see what I’m coping with…
After which I’ve the 2 ends of this part that can want tiles lower.
I’ll simply must apply a bit extra, after which do my finest. I can assure that these received’t be good, however I’m hoping that after it’s grouted, these little lower items on the ends received’t be all that noticeable. However, I imply, I can’t actually do higher than my finest effort, in order that must be adequate.
This will likely be my remaining submit on the step-by-step wainscoting undertaking. I’ll simply replace this submit as soon as it’s all grouted. Hopefully that will likely be later at present, however that every one relies on how lengthy it takes me to chop these tiles. 😀
Addicted 2 Adorning is the place I share my DIY and adorning journey as I transform and beautify the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do nearly all of the work on the home on my own. You may study extra about me right here.
I hope you’ll be part of me on my DIY and adorning journey! If you wish to observe my tasks and progress, you may subscribe under and have every new submit delivered to your electronic mail inbox. That means you’ll by no means miss a factor!
[ad_2]
Source link
