[ad_1]
This put up initially appeared on CheckingInWithChelsea.com.
Impressed by at present trending raffia-covered furnishings, I’m exhibiting you tips on how to construct your individual TV console desk coated in wallpaper for $150!
**I partnered with Titebond for this mission which makes me actually excited as a result of…I used their unique wooden glue and ONLY their wooden glue to carry my total desk collectively! What?!**
The objective for my home was a tall and large desk with none seen helps that broke up the clear traces. The general dimensions of my completed desk are 70″ large and 35″ tall. So hold that in thoughts with the supplies and minimize lists under!
What to Purchase
What to Reduce
1x2s:
- (4) @ 32″
- (7) @ 14-1/2″
- (2) @ 70″
3/4″ plywood:
- (4) 32″ lengthy x 16″ large
- (2) 70″ lengthy x 16″ large
Constructing the Console Desk Bins
Primarily we’re creating 3 separate containers. 2 would be the legs and 1 would be the tabletop.
Begin with the two smaller containers (legs) to get your toes moist. Lay a 32″ piece of plywood down and add your Titebond wooden glue alongside the highest aspect of all 4 edges. Then lay a 1×2 on its aspect on high of the glue, ensuring it’s flush with the sting of the plywood.
The 32″ items of 1×2 will go from edge to fringe of the plywood whereas the 14.5″ items ought to match snuggly between.
After getting the 1x2s lined up on the sides simply so, run a bead of wooden glue on the highest of them.
Gently set one other 32″ piece of plywood on high. Now your field leg is full!
Repeat for the opposite leg, utilizing a couple of clamps if essential to create tremendous tight joints!
You’ll comply with the identical steps to create the tabletop, solely you’ll add an extra 14.5″ 1×2 help someplace within the center. It will assist hold the lengthy 1x2s from sinking in and add general stability to the desk.
Ready is the Hardest Half
If you happen to’ve ever tried to pry wooden aside that’s been glued with Titebond, even for a couple of minutes, you realize it’s principally unimaginable to do nicely.
And that’s why you don’t want any nails or screws to carry your desk collectively. Wooden glue, when totally dried and cured, is definitely stronger than fasteners! So loopy however oh so true!
Let your 3 containers dry and arrange for at the least half-hour earlier than shifting on to the subsequent step.
Including Legs to the Desk High
Assuming your flooring is stage, set your leg containers upright, roughly 70″ aside. Apply ample quantities of wooden glue to the tippy high of your legs and gently set the tabletop in place. Modify the highest so it’s flush with the skin of your leg on one aspect earlier than adjusting the opposite leg.
For a desk this huge, it will be useful to have a pal or partner maintain the nice aspect in place whilst you manipulate the opposite aspect. However with a couple of back-and-forths, you’ll be able to deal with it your self too!
I used a pace sq. to ensure the legs have been at 90-degree angles. Not a foul device to have in your arsenal in case you don’t have one already!
While you’re happy together with your leg state of affairs, let it sit for about half-hour earlier than you begin protecting the whole lot in wallpaper!
Adhering Wallpaper to the Console Desk
I really like the feel of a raffia or light-colored wooden desk. And after a pal shared a reasonable peel-and-stick wallpaper she used that seemed like fake grasscloth, I knew I might use that to create the feel I wished for this piece of furnishings.
I additionally wished the desk to appear to be one slab of wooden. To create that impact with the wallpaper, I began on the backside of 1 leg, took it up and excessive, after which down the opposite leg with none cuts or seams. I additionally lined it up with the again fringe of the desk so it might fold and go down the entrance edge with none seams.
Hopefully, the video higher illustrates how I dealt with the corners, so watch it above! I had the paper that got here from the tabletop beneath the paper from the legs. Then I scored on the paper itself the 45-degree angle from the within nook to the skin nook of the wooden construction. I minimize any extra paper from the highest after which caught it down. Subsequent, I minimize the layer of paper coming from the legs alongside the road I simply scored. So when the whole lot was laid flat and caught down good, it appears to be like like my legs and tabletop have been mitered collectively.
Initially I deliberate to fastidiously trim the surplus on the finish of the entrance edge, however because it folded so properly with none effervescent, I folded the inch or so extra and caught it to the within of the desk.
And that obtained coated up subsequent with one other run of wallpaper. I purchased sufficient wallpaper (2 rolls) to cowl the within of the legs and the underside of the tabletop. And since I used to be much less involved on the underside about seeing seams, I coated them individually and ended up not protecting the underside of the tabletop itself. You actually can’t see it throughout on a regular basis use and it saved me $27 by not opening the second roll.🤷♀️
Oh and for the legs, the within wallpaper was flush with the entrance edge so the surplus was simply folded over and caught onto the again of the legs. Sure, it appears to be like unfinished from the bottom. BUT WHO CARES?!
The one place I wanted to trim wallpaper was on the base of the legs. I propped up one leg at a time with a scrap piece of 1×2 so I might trim it as exactly as attainable. I didn’t need any sliver of wooden exhibiting and giving freely my desk’s secrets and techniques!
About an hour or so after finishing the desk, there was nonetheless just a little wobble to it in case you shifted it back and forth. However after leaving it alone in a single day, the wiggle was gone and this desk was sturdy, steady and able to transfer to its new residence!
I ordered our poufs from Residence Depot* to function ornament AND further seating. They’re like refined beanbag chairs and the youngsters have already pulled them out to take a seat and roll round a number of instances!
The wallpaper behind the TV and console was not too long ago hung to create an accent wall. I prefer it by itself however I’m nonetheless making an attempt to determine if I just like the room as an entire with the wallpaper in it.🤔
However we do love the sleekness of our Body TV*! It was a splurge we handled ourselves to when our earlier home bought for method over the asking value. Now I’m pondering I would brush some gold paint on the body to match different gold frames within the room. The initiatives and concepts by no means cease round right here! Ha!
*This put up accommodates affiliate hyperlinks.*
Additional Studying
[ad_2]
Source link
