[ad_1]
Yesterday, I obtained one of many vanities for our grasp toilet rework fully completed. After doing a lot analysis on the easiest way to complete walnut, I made a decision to make use of Rubio Monocoat Oil Plus 2C. This product was model new to me, however after watching movies and seeing how straightforward it’s to make use of, I made a decision to present it a strive.
Earlier than I get to that, let me again up only a bit for many who might have missed earlier posts on this challenge. I constructed these table-style walnut vanities myself. Should you’d wish to see that challenge, you could find that right here:
And let me present you what it appears to be like like now that it’s been completed with the Rubio Monocoat…
Isn’t that beautiful?! I completely LOVE it!! It makes me wish to construct with nothing however walnut sooner or later, and end that walnut with nothing however Rubio Monocoat. Simply have a look at how the end introduced out such a richness of shade in that lovely walnut!
So let me present you the way I did it…
How To Apply Rubio Monocoat Oil Plus 2C
This product couldn’t be simpler to make use of. Right here’s the fundamental rundown of the steps:
- Sand the wooden to a 120-grit end.
- Clear the mud off of the floor.
- Combine the Rubio Monocoat Oil Plus 2C.
- Apply with a white applicator pad.
- Wait 10 minutes.
- Wipe off the surplus.
That’s it. Critically. I can’t consider some other end I’ve used that’s simpler to use. I can also’t think about how anybody may mess it up. It looks like a reasonably fool-proof end to me. And the perfect half is that it solely requires one coat, therefore the title Monocoat.
The principle factor to notice is that Rubio Monocoat Oil Plus 2C is (because the title ought to point out) an OIL-based end. Which means that it’ll considerably change the looks of the wooden. Should you don’t wish to change the looks of the wooden, you’ll need to discover a water-based end. My absolute favourite go-to water-based end is Basic Finishes Excessive Efficiency Topcoat in a flat end (which seems extra like a satin end to me).
However I can’t think about working with walnut and NOT eager to convey out the beautiful fullness of the colour of the wooden, so an oil-based end is ideal for walnut.
To complete the vainness, I began by giving the entire thing a closing sanding with 120-grit sandpaper. And since this vainness doesn’t have any giant, flat surfaces, I sanded the entire thing by hand.
I usually sand surfaces to 220-grit sandpaper earlier than making use of a end, however this specific end requires nothing larger than 120-grit in order that the oil can truly penetrate into the pores of the wooden and create a molecular bond with the wooden.
After sanding and vacuuming off all the mud that will come off, I used mineral spirits on a clear white rag to ensure the surfaces had been totally clear.
The mineral spirits briefly turned the wooden darkish, however because it dried, it returned to its gentle shade once more. I let it dry in a single day earlier than shifting on to the ultimate end.
And simply an FYI, wiping mineral spirits onto the floor of unfinished wooden is a good way to get a preview of what the wooden will appear like with an oil-based end. It received’t be actual, nevertheless it’s fairly shut. It may be helpful in serving to you resolve if you wish to use an oil-based or water-based end on a challenge.
With the vainness cleaned off and fully dry, I used to be prepared to combine up the end. The Rubio Monocoat Oil Plus 2C is available in many alternative colours. The one I used is named “Pure”. It’s a two-part end that must be combined collectively earlier than you employ it.
You possibly can truly buy and use the oil (the massive high container) by itself, however I’d think about that the oil by itself can be a end that would want reapplication periodically, identical to my butcherblock kitchen counter tops that I sealed with mineral oil. Since that oil didn’t have any hardener in it, it wanted to be reapplied each month or two.
However this one comes with an accelerator (which I feel is a hardener or one thing related that makes the end extra everlasting than a plain oil) that’s combined with the oil to present a long-lasting end. And a little bit little bit of this end goes a good distance.
To combine the 2 elements, I used a syringe (the sort that you simply purchase on the grocery retailer and use to present remedy to kids) to measure out the 2 elements, a small container (I all the time hold my previous measuring cups for these functions), and a scrap piece of wooden to make use of as a stir stick.
I opened the oil and stirred it very nicely earlier than mixing the 2 elements. After which I combined the 2 elements in keeping with the directions on the container — three elements oil to 1 half accelerator.
For the entire vainness, I ended up utilizing a complete of 36ml of oil and 12ml of accelerator. The complete cans of the oil and the accelerator combined collectively offer you 325ml of end (which is 11 ounces — 5 ounces lower than a pint), so this vainness required simply over 1/tenth of the little can of end. Like I mentioned, a little bit goes a really good distance.
To use the end, I used the white applicator pad that you simply see within the image above. I minimize that pad into 4 items for simpler use, dipped it into the combined oil, and rubbed it on to the floor of the wooden. You possibly can see within the image under what a distinction it makes. The entrance leg is completed with the Rubio Monocoat, however the facet apron and again leg should not.
I labored in sections, comparable to one leg at a time, after which after the oil end had about 10 minutes to actually soak in, I used a clear white fabric to wipe off the surplus.
And that’s it. Critically. That’s it.
I can’t think about it being any simpler! I feel it takes about to seven days to completely treatment, nevertheless it was dry sufficient to maneuver the vainness again into the toilet (and never really feel just like the oil was getting onto my arms) after a few hours.
The distinction between the vainness and the storage cupboard amazes me. I so needed to leap forward and end the middle cupboard as nicely. It took all of my self-control to cease myself. I simply suppose it might be wiser to attend till the entire thing is completed earlier than leaping forward making use of the oil end in a piecemeal vogue. I’m nonetheless ready for the veneer to reach in order that I can end the highest, and I wish to end the highest earlier than I resolve find out how to end the trim alongside the underside.
So till that arrives (which must be tomorrow), I’ll simply admire the one completed piece, and attempt to think about the way it will look when all three items have this deep, beautiful walnut shade.
I’m so glad I made a decision to make use of walnut for this toilet. It’s my favourite wooden species, and I can’t consider I’ve waited this lengthy to make use of it for the primary time. It’s not low-cost, and the Rubio Monocoat Oil Plus 2C isn’t low-cost, both. (That small container was round $50, nevertheless it actually does go a really good distance.) However I feel it was very nicely well worth the splurge.
Addicted 2 Adorning is the place I share my DIY and adorning journey as I rework and enhance the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do the vast majority of the work on the home on my own. You possibly can be taught extra about me right here.
I hope you’ll be part of me on my DIY and adorning journey! If you wish to observe my initiatives and progress, you possibly can subscribe under and have every new publish delivered to your e mail inbox. That means you’ll by no means miss a factor!
[ad_2]
Source link
