Today’s Homeowner Radio Show | March 4, 2022

On this week’s present, we’re sharing some sensible suggestions, plus some data on a brand new and stylish materials for driveways.

Contemplating a Rubber Driveway

Not many firms set up rubber driveways, however that would change within the close to future. Within the U.S. alone, 280 million tires are disposed of yearly, and many individuals are trying to find methods to recycle them. 

Rubber driveways are sturdy, virtually maintenance-free and slip-resistant. The typical value of poured-in-place rubber is about $7-15 per sq. foot, in accordance with HomeAdvisor.com. For comparability, concrete is about $1-2 per sq. foot and asphalt is $2-5. Due to the recycled supplies, rubber driveways lose colour extra rapidly and require extra frequent resurfacing. Seek the advice of with a contractor to see what choices can be found.

Skip to [1:05:41] for the complete phase on the At the moment’s House owner Radio Present. 

The best way to Take a look at to See if a Fluorescent Bulb is Good

Although LED lights are steadily changing fluorescent bulbs, there are nonetheless hundreds of thousands of them on the market. 

To see if a fluorescent bulb remains to be good, use a multitester (often known as a multimeter or volt/ohmmeter). Rotate the tester’s knob over to the ohm setting, take the 2 probes on the tip of the wire and contact them to the 2 probes on the tip of the fluorescent bulb. Two ohms or larger means the bulb remains to be good.

Should you see a black patch on the bulb’s filament, this implies the bulb is not working. 

Skip to [35:41] for the complete phase on the At the moment’s House owner Radio Present.

Tip for Portray Doorways

Portray a door in your house will be tough for a novice do-it-yourselfer, so longtime At the moment’s House owner Radio Present listener Mark, from Palatka, Fla., shared this tip: 

You’ll want three 3-inch screws. Screw one screw on the highest of the door, on the middle, about an inch and a half deep.

Then, on the underside of the door, screw the 2 different screws close to the skin edge, leaving about an inch-and-a-half uncovered. 

Subsequent, put the door in your sawhorses utilizing the screws to elevate it. Paint one aspect, seize the 2 outer screws, then rotate the door to color the opposite aspect.

You are able to do this with exterior or inside doorways. 

Skip to [26:29] for the complete phase on the At the moment’s House owner Radio Present.

Save a Glove, Pinch a Penny

As a result of rubber gloves are so low cost, it’s straightforward to interchange them. Nonetheless, in case you’re seeking to pinch some pennies, right here’s a tip to avoid wasting a pair. Merely purchase a tube of adhesive to patch the outlet. 

Flip the glove inside out, clear the realm across the gap with rubbing alcohol, and watch for it to dry. Then unfold the adhesive on and past the outlet by a couple of half-inch. If that fails, you will have to interchange the gloves. 

Skip to [14:55] for the complete phase on the At the moment’s House owner Radio Present.

Additionally on this episode:

• Greatest Base for a Plastic Shed
• Methods to Insulate a Cinderblock Storage
• Putting in Laminate Flooring and Baseboards
• Get Granite Counter tops with out the Sticker Shock

This Quick-Drying Paint is Scuff-Resistant and Stain Repelling. Study extra>>

Different Merchandise and Hyperlinks Talked about

Additional Studying